| Model |
AN9602X(F) |
AN9605X(F) |
AN9632X(F) |
AN9671X(F) |
| AC Hipot Test |
Rated Output |
500VA
AC: 5kV/100mA |
100VA(AC: 5kV/20mA) |
|
| Output Voltage Set and Range |
0.2kV~5.00kV AC,100mA 10V/step |
0.2kV~5.00kV AC, 10V/step |
|
| Output Voltage Adjustable Rate |
±(2.5% of setting+10V) |
|
| Output Voltage Resolution/Accuracy |
10V, ±(2.5% of setting+10V) |
|
| Output Frequency Range |
50Hz, 60Hz (Optional) |
|
| Output Waveform |
Sine waveform, pure resistance, above 200V, distortion <5% |
|
| Upper and Lower Limit Leakage Current Setting |
AC: Upper: 0.10~100.00mA, Lower:0.10~100.00mA(0=disable), 0.01mA/step |
AC: Upper: 0.10~20.00mA, Lower:0.10~20.00mA(0=disable), 0.01mA/step |
|
| Breakdown Current Measurement Range |
0.100~3.499mA/3.50~100.00mA |
0.100~3.499mA/3.50~20.00mA |
|
| Breakdown Current Accuracy |
±(2.5% of reading+5 counts) |
|
| Ramp-up Time Setting Range/Resolution |
1.0~999.9s (0=disable) 0.1s/step |
|
| Test Time Setting Range/Resolution |
1.0~999.9s (LLL=continues) 0.1s/step |
|
| Test wire compensation |
0~0.500mA, manual clear offset |
|
| Insulation Resistance Test |
Output Voltage Setting and Measurement Range |
|
100V ~1000V DC 5V/step |
| Output Voltage Resolution/Accuracy |
|
1V , ±(3% of setting+5V) |
| DC Ripple Coefficient |
|
≤5% (1kV DC, <1mA, resistance load) |
| Output Voltage Adjustable Rate |
|
±(3% of setting+5V) |
| Test Time Setting Range |
|
1.0~999.9s 0.1s/step (LLL= continues) |
| Lower limit of Insulation Resistance |
|
1~2000M |
| Upper limit of Insulation Resistance |
|
1~2000M (0=off) |
| Insulation Resistance Range |
|
1~2000M, auto shift level |
| Insulation Resistance Accuracy |
|
500~1000V: ±(3% of reading+8counts) 1~200M;
±(8% of reading+8counts) 200~2000M
Below 500V: ±(5% of reading+8counts) 1~200M;
±(10% of reading+8counts) 200~2000M |
| Interface Function |
RS232(RS485 optional), Remote control(PLC) |
| Dimension W×H×D(mm) |
450×150×440 |
320×110×400 |
| |
|
|
|
|
|
|
|